Step 3; Attach Lower Main Pole; Screw The Height Adjuster Into The Upper Pole; Step 4 - Royalbeach Rbsports Rb 35322 Bedienungsanleitung

INHALT ASSEMBLY
GB
ATTENTION!
Please don't lie the pole sideways to assemble it as the threads may not sit flush when you screw them sideways,
thus it will increase the ‚flex' in the pole once it is up!

Step 3

3.1 Attach lower main pole

➞ Attach lower main pole (Main Pole A), Screw the lower main pole onto the extension or base insert.
Tighten firmly by hand. (like the picture 1)
3.2 Screw the height adjuster into the upper pole (Main Pole B).
➞ Screw the height adjuster into the upper pole (Main Pole B), screw it counterclockwise,(see picture 2 above) and screw it to very
new the end of the main pole B.(see picture 3). Again, the safe limit of adjuster is 20cm, you can't calculate the height of adjuster
more than 20cm
Picture 1
ATTENTION!
Please insert the pole not sideways to mount out, otherwise the thread can not sit well, when they rotate.
➞ Take the panel for the adjustment (3) and put them on the main pole A (4). This panel is for deadline for the cover of the height
adjustment is required.

Step 4

4.1 Joint main pole A and B together.

➞ Joint the main pole A ( which have attached the Articulating base ) and Main pole B (with the height adjuster) together,
screw up tightly and hold vertical. We would like to suggest to screw up two poles with your assistant.
(Picture 1 and 2)
NOTE!
We propose that the bars with a second person
zusammenzuschrauben (s. Picture 2).
DANCING POLE
12
Main Pole A 100 cm
Picture 2 Picture 3
Picture 1 Picture 2