Electrolux IK2581BNL Benutzerinformation Seite 10

To adjust the temperature, refer to
"Temperature regulation".
4.6 Switching off the freezer
It is possible to switch off only the freezer
compartment leaving the fridge compartment
on.
1. Press and hold the freezer temperature
button for 5 seconds.
The display shows blinking
2. Once the freezer compartment is
switched off, the display reads
4.7 Switching on the freezer
To switch on the freezer compartment:
1. Press and hold the freezer temperature
button for 5 seconds.
The display shows blinking
2. The freezer compartment is switched on
and the previous set temperature is
restored.
To adjust the temperature, refer to
"Temperature regulation".
4.8 MultiSwitch
With the MultiSwitch function, you can
convert the freezer compartment into a fridge
and thus effectively expand the appliance's
fridge capacity.
Before activating the MultiSwitch function
remove the frozen food from the freezer
compartment to avoid accidental
defrosting.
To convert the freezer compartment into a
fridge:
1. Tap the freezer temperature button
repeatedly until the display shows
starts blinking.
2. Press within the next 7 seconds. If
you do not press the button within this
10 ENGLISH
3. The freezer temperature indicator shows
The MultiSwitch compartment reaches
the set temperature after 24 h. Wait until
the MultiSwitch compartment has
reached the set temperature before using
it.
.
When the MultiSwitch function is on:
• the High temperature alarm is disabled
.
• it is not possible to activate the Extra
The MultiSwitch function deactivates when
you switch off the appliance.
The MultiSwitch function resumes operation
once the power is restored after a power
failure.
.
The MultiSwitch function deactivates when
you switch off the converted compartment.
Before deactivating the MultiSwitch
function, remove the food from the
MultiSwitch compartment to avoid
freezing the fresh food.
To convert the MultiSwitch compartment back
into a freezer:
1. Press the freezer temperature button.
2. Press
3. The freezer temperature indicator shows
The MultiSwitch compartment reaches
.
the set temperature after 24 h. Wait until
the MultiSwitch compartment has
reached the set temperature before using
it.
time, the freezer compartment will not
convert into a fridge.
the temperature of the MultiSwitch
compartment (4°C).
Freeze function.
starts blinking.
within the next 7 seconds. If
you do not press the button within this
time, the MultiSwitch compartment will
not convert back into a freezer.
the temperature of the freezer
compartment.