Samsung DVD-HD745 Handbuch Seite 6

Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1 Method 2
Basic Audio Video S-Video
TV
S-Video
AV
Cable Cable
OR
DVD
Player
Audio Output Video Output S-Video Jack
Jacks Jack
1. Connect a cable with the desired method.
2. Turn on your TV and DVD Player.
3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 38)
4. Select the video output according to the cable connection.
If you use the VIDEO SEL. button, you can change easily video output in no disc mode.
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video, SCART or Component (I-SCAN).)
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video.)
Method 3
DVD Player + TV with Scart Input Jacks (Audio & Video)
(The Video Output in Setup Menu must be set to SCART Output.)
Method 4
DVD Player + TV with Component Video Jacks
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
Note
• If you press the VIDEO SEL. button, Video output mode is changed in regular sequence in no disc mode.
(S-Video I-SCAN P-SCAN & DVI SCART RGB
Method 3 Method 4
SCART Jack Interlace scan
Scart
Cables Video
(not
Cables
supplied)
OR OR
SCART Jack Component Jacks
SCART Video)
ENG-10
Choosing a Connection
Connection to a TV (For Progressive scan, Digital Video)
Method 1
Progressive scan Basic Audio
TV
DVD
Player
Component Jacks
Audio Output Jacks
Method 1
DVD Player + TV with Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Method 2
DVD Player + TV with DVI Jack.
• Depending on your TV, your hookup for Method 2 may differ from the illustration.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Important Note
• Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual's instructions regarding Progressive Scan
settings in the TV's menu system.
• When the Video output is Progressive Scan, Video and S-Video, SCART will not work.
• If you want to convert Video Output to Progressive Scan, select Component (P-SCAN) in SETUP menu and
then select "Yes" within 10 seconds. Finally change the TV's external input to Component(576p/480p).
(See Page 35)
• Use the VIDEO SEL. button to easily change the video output in no disc mode. (See page 10)
• Refer to your TV user's manual.
Method 2
Digital Video DVI Audio Input
Digital Video Out Audio Output Jacks
ENG-11