Setting The Gateway For The Sws Server - schell SMART.SWS Kurzanleitung Zur Inbetriebnahme

Setting the gateway for the SWS Server

Path: Facility Information — Server — Ethernet – Gateway
Use the IP address of the connected SWS Router as the gateway address.
Gateway
Invoer
Wijziging
Toepassen
» Enter the gateway address and apply your changes.
» Save the new Ethernet connection configuration and then restart the SWS Server to apply your changed
settings.
Before a connection can be made between a SCHELL SMART.SWS Router and the SCHELL Platform in the internet,
the SCHELL SWS Server must first be activated by SCHELL.
Once the server has been activated, the MQTT connection must be configured, as described in the following
section.
Gateway
Configuratie
192.168.13.1
- 39 -
EN
Toepassen