Configuring The Ethernet Connection For The Sws Server; Konfiguration; Adjustment - schell SMART.SWS Kurzanleitung Zur Inbetriebnahme

Configuring the Ethernet connection for the SWS Server

Path: Facility Information — Server — Ethernet
DHCP Client
Mode
DHCP Server
Mode
Static IP
Mode

Konfiguration

IP
Configuration
Subnet Mask
Configuration
Gateway
Configuration

Adjustment

Save
» Set the SWS Server to "Static IP" mode.
Following this, you then need to configure the IP address, subnet mask and gateway.
Ethernet
Status/Configuration
- 37 -
EN
Save