Jupiter 700 Serie Gebrauchsanweisung Seite 5

1
Assembly
Step 1.
Apply a liberal amount of cork grease onto
the mouthpiece cork of the neck assembly.
Step 2.
Join the mouthpiece and the neck assembly
together with a gentle, twisting motion.
Allow the mouthpiece to be positioned
to leave approximately 2 cm ("3/4) cork
exposed. Tighten the neck taking care not to
over-tighten.
Step 3.
Apply a small amount of cork grease to the
base of the of neck assembly. Insert neck base
into the body section. Then,tighten the neck
screw.
3<<<Saxophone Owner's Manual
Step 4.
Adjust the lip plate so the embouchure hole is
inline with the C # key on the body joint.
2
Disassembly
Step 1.
Loosen the neck screw after playing and
remove neck from body section.
Saxophone Owner's Manual>>>4