Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Make a 125 mm (4.9 inch) hole into the wall for adapter (F). Min 30 cm (12 inch) from the ground. Max 120 cm
(47 inch) from the ground.
5. Fasten adapter (F) to the wall using the four screws and wall plugs(G).
6. Connect the hose to adapter (F).
NOTE: Cover the hole with the cap on adaptor (F) when not in use.
NOTE: To ensure proper function, do not overextend or bend the hose. Make sure that there are no obstacles
around the air outlet (within 500 mm) in order for the air outlet to work properly.
Alternative installation
If you cannot or do not want to do a wall installation, you can alternatively simply place the hose in an open window
for example. No installation accessories are included for alternative installations. They must be purchased separa-
tely.
Control panel
Mode button ("MODE") = switch between cool, only fan, and dry modes. The LED indicates current mode.
(-) and (+) buttons = Decrease/increase temperature setting in 1°C/2°F (or 1°F) increments. Range: 17°C to 30°C
(62°F to 88°F). Or adjust fan speed.
NOTE: Can display temperature in Fahrenheit or Celsius. To change, press and hold the (-) and (+) buttons for 3
seconds.
Power button = Power the product on or off.
If it has been powered off, it will not start within 3 minutes. This is to protect the device. It will automatically start
after 3 minutes.
Display = Displays error codes, timers, or temperatures. In cooling mode = Shows set temperature. In dry and only
fan modes = Shows room temperature.
Cooling mode = Press the "MODE" button until the "Cool" indicator lights up. Fan speed cannot be adjusted in this
mode.
During cooling mode when the temperature is lower than the set value, the product will temporarily pause. When
the temperature rises again the product will continue cooling.
Only fan mode = Press the "MODE" button until the "Fan" indicator lights up. The temperature cannot be adjusted.
Do not place the hose or ventilation hose in a window in this mode.
Dry mode = Press the "MODE" button until the "Dry" indicator lights up. Fan speed and temperature cannot be
adjusted in this mode.
41
Werbung
