Comfy Go Mobility X-1 Bedienungsanleitung Seite 22

English English
4. Maintenance Areas
3) Coating
The high quality of the surface layer guarantees optimal protection
against corrosion. When cleaning, use warm water, mild detergents
and a sponge or soft brush. Be sure that no wetness gets into the
tubes or frame.
4) Inspection
We recommend one full inspection every year and general inspections
before each use. The following checks are recommended during a full
inspection and should be documented by the user or authorized
person.
- Check the frame parts and the hinged tubes for plastic deformation,
cracks and impaired functioning.
- Visually check for damage to the paintwork (danger of corrosion).
- Check the operation of the wheels (free running, level rolling, axle
play, tires, profile, condition of the rims, floating axles, etc.).
- Check the solidity and tightness of all screws, bolts and nuts.
- Verify adequate amounts of grease on all metal joints and movable
parts.
- The condition of the axles of the main steering wheels.
- Visually check all plastic parts for cracks or brittle spots.
- Functionality of the armrests, splash guards, and footrests.
- Functionality of all adjusting mechanisms, levers and adjusting
screws.
- Operation of other detachable parts (example: anti-tipper, personal
safety belt, backrest, seat, etc.).
21