Comfy Go Mobility X-1 Bedienungsanleitung Seite 21

English English
4. Maintenance Areas
Regularly check these parts to avoid losing parts or causing excessive
wear and tear.
1. Screws, nuts, and bolts
2. Brakes and brake lever
3. The front and rear wheels and tire tread depth
4. Wheel axles
5. Backrest adjusting system (for wheelchairs with reclining feature)
6. Other adjusting systems
Storage and transportation
1) Before use, please check if any parts are loose or missing.
2) Wheelchair should be covered and labeled.
3) Avoid moisture and direct sunlight and keep the wheelchair away
from heat sources.
4) Do not store outdoors.
5) Storage conditions
- Storage environment no to exceed (-40 Celsius to +55 Celsius or -47
Fahrenheit to 131 Fahrenheit)
- Relative humidity ≤80%
Care and Cleaning
1) Seat and backrest
- Clean seat and backrest with damp cloth, but do not soak the seat
and back cushion.
- Use a mild detergent for removing stubborn dirt.
- Stains can be removed by using a sponge or a soft brush.
- Do not use strong cleaning liquids such as solvents and do not use
hard brushes or sharp-edged objects.
- Do not clean with steam or pressure washers.
2) Plastic parts
Clean the plastic parts of your wheelchair with a mild plastic cleaner.
Use a sponge soft brush. Plastic parts include the arm pads, splash
guards, footplates, handgrips, and tires.
20