Ikra GGS-I-190 Gebrauchsanweisung Seite 27

- Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
Using and handling the power tool
- Do not overload the power tool. Use the appropriate power tool for
your work. The right power tool allows you to work better and safer in
the specified power range.
- Do not use any power tool that has a defective switch. Power tools
that can no longer be switched on or off are dangerous and must be
repaired.
- Disconnect the plug from the socket and/or remove any removable
batteries before making adjustments to the device, changing any
insert tool parts, or putting the power tool away. This precaution
helps prevent unintentional starting of the power tool.
- Keep power tools out of the reach of children when not in use.
Whoever is not familiar with the power tool or who has not read
these instructions should not be allowed to use it. Power tools are
dangerous if used by inexperienced persons.
- Power tools and insert tools must be subject to careful
maintenance. Check whether moving parts function properly
without jamming, and whether parts are broken or damaged to such
an extent that they impair the functions of the power tool. Have
damaged parts repaired before using the power tool. Many accidents
happen due to poorly maintained power tools.
- Keep cutting tools sharp and clean. Carefully maintained cutting tools
with sharp blades tend to jam less and are easier to guide.
- Use power tools, insert tools, insert tool parts, etc. according to
these instructions. While doing so, take into account the working
conditions and the activity to be performed. The use of power tools
Safety
27