KERR ultra-waxer 2 Bedienungsanleitung Seite 5

Action
Power On
Select Spatula
Adjust
Temperature
Menu
Options
Quick Heat
Preset
Temperature
Select °C / °F
Auto Off
Buzzer
Power Off
Button Selection / Screen View
KERR
ULTRA-WAXER
SPATULA1 97F
SPATULA2 97F <
SPATULA1 97F
SPATULA2 150F <
QUICK HEAT <
PRESET TEMP
QUICK HEAT <
PRESET TEMP
Quick Heats
Spatula 1
PRESET TEMP <
SELECT C OR F
S1 PRESET TEMP1 <
200F
SELECT C OR F <
AUTO OFF
AUTO OFF <
BUZZER
AUTO OFF ENABLE
90 mins
BUZZER <
TURN OFF UW
BUZZER
TURN OFF UW <
SPATULA1 97F <
SPATULA2 97F
Quick Heats
Spatula 2
S1 PRESET TEMP1 <
S1 PRESET TEMP2
SPATULA1 200F <
SPATULA2 300F
DEG CELSIUS
DEG FAHRENHEIT <
DISABLE
EDIT AUTO OFF <
AUTO OFF
ENABLE
BUZZER ON
BUZZER OFF
TURNING OFF
ULTRA-WAXER
Info
Press and release ENTER
button to power on unit.
Press and release MENU
button to select spatula.
Press ENTER to select
Press UP/DOWN buttons to
change temperature, and
press ENTER to select.
Press MENU button for 2
seconds to get to menu
options.
Press ENTER to select Quick
Heat, spatula selected will
blink for 15 seconds until
heated.
Also access Quick heat
quickly by pressing MENU &
UP, or MENU & DOWN but-
tons simultaneously.
To select Preset tempera-
tures, select the spatula.
Adjust to desired tempera-
ture by using UP/DOWN
buttons, then press ENTER
to select.
To change from °C to °F, use
UP/DOWN buttons then
press ENTER to select.
Enable or Disable the Auto
Off feature by using ENTER
button.
Edit Audit Off cutoff time by
using UP/DOWN buttons to
change minutes, then select
ENTER.
Turn on or off Buzzer in
menu options, by selecting
and pressing ENTER button.
Select TURN OFF UW from
menu, or Press ENTER
button for 3 seconds to
power off.