Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Move the cover left at the top of the door to the
right at the top of the door. Then lift the door and
place it on a soft surface to prevent scratches.
6. Loosen the pin on the bottom hinge, turn the
hinge bracket around and screw the pin back in.
7. Mount the bracket on the lower hinge pin. Screw
on both levelling feet.
8. Place the door on the bottom hinge again. Make
sure that the door is aligned horizontally and
vertically so that the seals on all sides fit tightly
onto the door before permanently mounting the
top hinge. Place the top left hinge on top of the
appliance and screw tight. Use a spanner to
tighten it, if necessary.
9. Replace the hinge cover and the screw.
29
Werbung
