Herunterladen Inhalt Inhalt Diese Seite drucken

Vidimensio 3D VGA ENCODER Bedienungsanleitung Seite 24

3d video mixer für die einstellungskontrolle bei stereoskopischen aufnahmen mit zwei kameras
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Brightness B: Brightness at Video-B, for it (+ / -)
• Contrast B: Contrast at Video-B, for it (+ / -)
Some more features are provided, which can be activated by pressing two
buttons at the same time:
• Horiz.Setup Left + Horiz.Setup Ratio = Single / Dual displaying
(only one or both video sources are shown)
• Vert.Setup Up + Vert.Setup Ratio = Colour sample on / off
(The Colour samples cannot be scaled or moved)
• Brightness A + Contrast A = Reset basic setting for Video-A
• Brightness B + Contrast B = Reset basic setting for Video-B
• Horiz.Setup Left + Vert.Setup Up = Upper shown image reception setting,
for it (+ / -)
• Horiz.Setup Ratio + Vert.Setup Ratio = Change of colours:
Normal -> red+blue -> blue+red -> red+green -> green+red
(Anaglyph)
Set the values in that way, that the images of the single cameras are displayed
without any cutted frames.
By the small switch you can change the display mode:
• PHASE/VIDEO „A" or „B": Eye-allocation in usage of wired 3D LCD Glasses
at the „WIRED GLASSES" output of the 3D VGA ENCODER
OR
Selection of the displayed video source in Single Mode (only A or only
B)
• FRAMES „Half" or „Full": Choosing Half, half images of the video inputs,
choosing Full, full images of the video inputs get displayed.
At fast movements in setting „Full" it can happen, that the lines of the
image are comb-shaped deferred. If this is a problem, it is
recommended to use setting „Half".
• RATIO: „4:3" or „16:9": Ratio of the displayed image.
• DISPLAY: "Line" or „Page": At „Line" the two images get interlaced line-
by-line (Line Interlaced), at Page as full images (Page Flipping) are
displayed.
• FREQUENCY: „60Hz" / „85Hz" frame rate of the output VGA video signal.
At 60Hz and DISPLAY/Page setting the image maybe can flicker.
Changing the switch position can lead to a deviation of the appointed values, so
the display detail should be readjusted.
The adjusted values get saved.
Even after turning off the 3D VGA ENCODER, the adjusted values keep saved. By
that no new configuration of the settings is necessary.
23

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Vidimensio 3D VGA ENCODER

Inhaltsverzeichnis