Description Of The Funtion Elements And Connections - Vidimensio 3D VGA ENCODER Bedienungsanleitung

6. Description of the funtion elements and connections

(1) (2) (3) (4)
On the front of the 3D VGA ENCODERs there exist 5 small switcher and
10 press buttons.
Separate features are following:
1. Operation mode display LED
2. Phase of eye-allocation at 3D Glasses or HMDs
(which image belongs to which eye)
and respectively Mode switch for individual video displaying
3. Image cut setting: Horizontal position
4. Image cut setting: Horizontal scale
5. Frame Selector: Half= only half-images are used
Full= full images are used
6. Image cut setting: Vertical position
7. Image cut setting: Vertical scale
8. Display detail ratio: 4:3 or 16:9
9. Brightness setting for video image-A
10. Contrast setting for video image-A
11. Displaying Modi: Line=Linear interlaced, Page=Frame change
12. Brightness setting for video image-B
13. Contrast setting for video image-B
14. Refresh rate: 60Hz / 85Hz
15. Reduce selected setting value
16. Increase selected setting value
3D VGA ENCODER frontview
(5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16)
20