Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6 Commissioning
Note:
- The anti-static bar does not work if the emitters are covered. The protection cover is
meant to protect the emitters during transport and mounting.
6.1 Commissioning the anti-static bar through the IQ Easy Platform
If an "Undefined param" appears in the info screens of the bar on the
Manager, the Manager must be supplied with the newest software.
Download the latest software version on
and follow the "Upgrade" instructions as described in the manual of the Manager.
- Remove the protective cap from the anti-static bar.
- When the M12 connection cable connects the anti-static bar and the IQ Easy platform,
communication will be established automatically, which is indicated by flashing status LEDs.
By default, the bar will activate after all information has been gathered by the Manager. This
is indicated by the background colour of
Please refer to the Manager IQ Easy user manual for a general explanation.
The bar will now ionise.
6.2 Selecting EXPERT mode for setting parameters or maintenance
In order to set parameters and carry out maintenance, you need expert user privileges. A
password may be required. For a detailed description, please refer to chapter 6.4 of the manual
Manager IQ Easy.
Once logged in at this user level, you will remain on this level until selecting a new user level.
- Go to the main screen
- Enter the password and confirm with
the Manager, if no password is required.
- Click
and go to the device to check and/or change the parameters by clicking
behind the parameter or desired action.
- By clicking
EasION IQ 4.0_UM_9752153210_NL_D_GB_FR_V2_3
, select settings
you will return to the main screen.
www.simco-ion.co.uk/software
changing to blue.
and choose expert.
or return directly to the system settings page of
70
Werbung
Inhaltsverzeichnis
