Command Not Confirmed; Maintenance And Cleaning; Technical Specifications - Homematic Hm-Sec-Rhs Montageanleitung Und Bedienungsanleitung

10.2 Command not confirmed
If a receiver does not confirm a command (at least
one when more than one have been taught), the
device LED is illuminated in red when the transmissi-
on is complete. The error will then be found with the
receiver:
• Receiver not accessible
• Receiver cannot execute command
(load failure, mechanical blockage, etc.)
• Defective receiver

11 Maintenance and cleaning

The product is maintenance-free besides possibly
requiring a battery change. Maintenance or repairs are
only to be done by trained professionals. Clean the
product using a soft, clean, dry and lint-free cloth.
To remote heavier contamination, make the cloth
damp with lukewarm water. Cleaning agents that con-
tain solvents are not to be used because it can harm
the plastic housing and the labels.
42
12 Technical specifications
Radio frequency:
Typ. outdoor range:
Power supply:
Battery lifespan:
Protection type:
Housing:
Housing color:
Dimensions:
Weight (Sensor and Magnet):
Subject to technical changes.
Instructions for disposal:
Do not dispose off the device as part of
household garbage! Electronic devices are to be
disposed of in accordance with the guidelines
concerning electrical and electronic devices via the
local collecting point for old electronic devices.
The CE sign is a free trade sign addressed ex-
clusively to the authorities and does not include
any warranty of any properties.
868.3 MHz
100 m
2 x button cell LR44
approx. 2 years
(4 actuations per day)
IP20
ABS
Pure white
120 x 32 x 16 mm
(H x W x D)
22 g (without battery)
43