Herunterladen Diese Seite drucken

WilTec 50744 Bedienungsanleitung Seite 9

Heizöl- und dieselpumpe
Vorschau ausblenden Andere Handbücher für 50744:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by means of fire or
electric shock we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you have understood its
content.
Always use a grounded power connection with the appropriate mains voltage. You can find the corre-
sponding mains voltage on the type plate. If you have any doubts about the connection being ground-
ed, have it checked by a qualified professional. Never use a faulty electric cable.
Do not open the pump in a wet or damp environment or when you are wet yourself and protect it from
direct sunlight. Install this device in a safe location so that nobody can step on the cable, fall over or
damage it. Make sure additionally you provide sufficient cooling through the ambient air and avoid
heat accumulation. Disconnect the power plug before cleaning the diesel pump and use only a damp
cloth for cleaning. Avoid using cleaning agents and take care that no fluids penetrate into the device.
The interior of the airbrush compressor contains no parts that can be inspected or serviced by the
user. Leave the maintenance, adjustment and repair to qualified technical personnel. In case of unau-
thorised intervention the 2-year warranty is no longer valid! Keep these operation instructions safe.
Safety guideline
BEWARE:
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or you follow the instructions made by this person how to use
the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
Run a visual inspection of the device before every use. Do not use the device if the safety ap-
pliances are damaged or worn out. Never override safety regulations.
Use the device exclusively according to the intended purpose stated in the instructions for
use.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external influences the cable must not be repaired!
It has to be replaced with a new one. This work can be carried out only by an electrician.
The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to cor-
respond to the existent mains voltage.
Never lift, carry or fixate the device by using the power cable.
Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture.
Disconnect the mains plug before the maintenance work.
Avoid exposing the diesel pump to direct water jets or rain.
The user is responsible for the compliance with location specific safety and installing regula-
tions. (Ask an electrician).
Consequential damage arising from flooded rooms caused by dysfunctions of the appliance
must be avoided by means of
pump).
In case of malfunction the repair work can be carried out only by a qualified electrician or the
WilTec-service.
The appliance must not run dry or with a completely closed intake port. The manufacturer's
guarantee is no longer valid if the damage is caused by dry running.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
the
appropriate measures. (installing an alarm system, reserve
Seite 9

Werbung

loading

Diese Anleitung auch für:

50743