Wall Mounting And Prepairing Remote Control - auna 10026464 Handbuch

1. Align the Sound bar in the chosen location.
Use a pencil to mark the drilling positions
400mm apart.
NOTE: The Sound bar should be located at
least 7.5cm below the bottom of the TV.
2. Drill holes as marked in step 1.
Wall Mounting
3. Insert 2 screws (not supplied) into the holes
and tighten. Take care to leave 5mm bet-
ween the screw heads and the wall.
NOTE: You will need to ensure the screws
are long enough to sufficiently grip the wass
while allowing 5 mm between screw head
and wall.
4. Hook the Sound bar into the screws. For se-
cure mounting ensure the crew heads slide
firmly into the narrow part of the brackets.
13