4. Display and control elements
4.2 Display sequence
Different information can be displayed, depending on the operating
mode. A detailed diagram of the information, which can be called
up, is shown in the Overview included with every data logger.
4.3 Button functions
Programmed Wait Mode and Key start Start criterion:
Keep GO button pressed for approx. 3 sec. to start the
measuring program.
- The measuring program starts and Rec appears in the display.
Operating mode Wait:
Press the GO button to change between the Top alarm value,
Bottom alarm value, Battery life and Last reading displays.
- The displays appears in the named sequence in the display.
Operating mode Rec or End:
Press the button GO in order to change between the Highest
saved reading, Lowest saved reading, Top alarm value, Bottom
alarm value, Battery life and Last reading displays.
- The displays appear in the named sequence in the display.
37