Display And Control Elements; Display - testo 174 Bedienungsanleitung

4. Display and control elements

Top alarm value *
Bottom alarm value *
36

4.1 Display

Measuring program
finished
Measuring program
is running
Readings
* Flashes: Programmed alarm value is displayed
Lights up: Programmed alarm value has been exceeded
Due to technical reasons, the display speed of the liquid crystals
slows down at temperatures below 0 °C (approx. 2 s at -10 °C,
approx. 6 seconds at -20 °C). However, this does not have any
influence on the accuracy of the measurement.
Battery capacity
Symbol
LO
Start criterion
Programmed Date/ Time
Waiting on measuring program
to start
Highest saved reading
Capacity
75-100%
50-75%
25-50%
10-25%
<10%
Battery empty (Measuring program was stopped)
Data is read out and battery is changed (See
8. Changing the battery, P. 47)
Lowest saved
reading
Units
Battery
capacity