LGB L21430 Bedienungsanleitung Seite 10

SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Öl (7149).
Changing Light Bulbs (E130 023)
Headlights: Carefully lift the glass from the lantern. Pull the light bulb out of the
socket with a pair of tweezers. Insert new light bulb. Put the model back together.
Interior Lighting: Pull the light bulb out of the socket with a pair of tweezers. Insert
new light bulb.
Changing Traction Tires (E126 174)
• Remove the old traction tire with a small at blade screwdriver:
• ift the old traction tire out of the groove in the driving wheel.
• Carefully push the new traction tire over the wheel and insert it into the groove of
the wheel.
• Check to make sure that the traction tire is properly seated.
Controllable Functions
1
Lighting
Sound effect: Long whistle blast
Sound effect: Squealing brakes off
Raising/lowering pantographs, sequence
Sound: Greeting announcement
Sound: station announcements, sequence for Chur - St. Moritz
Sound effect: Operating sounds
Raising/lowering pantographs, direction-dependent
Sound on/off
ABV, off
Sound effect: Short whistle blast
Sound effect: Main relay
Sound effect: Heating voltage relay
Sound effect: Blower
Sound effect: Compressor
Sound effect: Sanding
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Doors being closed
Sound effect: Railroad grade crossing
Sound effect: Letting off air
Sound effect: Rail joints
Sound effect: Coupling together (buffer to buffer)
1
active in analog operation
2
with random sounds
3
is turned off by Function 7
10
3
1, 2
1
LV + LR
1 Sound 1
2 BS
3
4 Sound 5
5 Sound 4
6 FS
Sound 15
7
+ AUX 5
8
9
10 AUX 1 + 2
11 AUX 3
12 AUX 4
13 Sound 9
14 Sound 11
15 Sound 14
16 Sound 2
17 Sound 6
18 Sound 20
19 Sound 19
20 Sound 17
21 Sound 18
22
23