Herunterladen Inhalt Inhalt Diese Seite drucken

AUDIOLINE OSLO 280 Bedienungsanleitung Seite 47

Schnurloses digitales dect telefon mit anrufbeantworter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

11.5.2 Recording outgoing messages
Your own outgoing message must be minimally 5 seconds and maximally 1:30 minutes long.
Firstly, select the outgoing message type you want to replace (refer to Section 11.5.1). The re-
spective, pre−recorded outgoing message is replaced by the one you record. The pre−recorded
outgoing messages can be restored simply by deleting your own outgoing messages (refer to
Section 11.5.4).
2 sec @
w or v
{ì} ð
The new outgoing message is played back.
11.5.3 Playing the current outgoing message
@
s
11.5.4 Deleting your own outgoing message (resetting default outgoing message)
After deleting your own outgoing message, the pre−recorded message is automatically reactiva-
ted.
@
11.6
Receiving messages
11.6.1 Memory capacity
The answering machine can digitally save up to 59 incoming messages with a total length of 11:30
minutes. The maximum length for each incoming call is 3 minutes. If the caller's message is lon-
ger, the call is disconnected. If there is a pause in excess of 5 seconds during recording, the call
is automatically ended.
When there is no memory capacity available to record new messages, no further messages are
recorded. The caller receives a message automatically, indicating that no messages can be left.
11.6.2 Playing back messages
The recorded messages are played back in the sequence they were recorded. The weekday and
time of receipt are played back with each message.
q
s
w
v
11.6.3 Deleting one message
q
11.6.4 Deleting all messages
All the messages (those heard and not heard) are deleted from the memory.
q
v
− Telephone Answering Machine −
Activate outgoing message mode.
While the OGM is playing, press and hold the Rewind
button (to change OGM 1) or Forward button (to change
OGM 2).
Speak your message after the acoustic signal. To end
recording, simply release the w or v button.
Play the outgoing message
Stop playback
Play the outgoing message
Delete your own outgoing message /
Activate default outgoing message
Play the message
Stop playback of the message
Repeat playback of the message
Play the next message
Play the message
Press the Delete button as the message is being played.
Start playing back the messages
Press the Forwards button as often as necessary to reach
the end of the message recordings and
then press the Delete button
47

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis