Yamaha TT-S303 Bedienungsanleitung Seite 3

• When setting up the unit, make sure that the AC
outlet you are using is easily accessible. If some
trouble or malfunction occurs, immediately turn
off the power switch and disconnect the plug
from the AC outlet. Even when the power switch
is turned off, as long as the power cord is not
unplugged from the wall AC outlet, the unit will
not be disconnected from the power source.
• If you hear thunder or suspect approaching
lightning, quickly turn off the power switch and
pull the power plug from the AC outlet. Failure to
observe this may cause a fire or malfunctions.
• If not using the unit for long periods of time, be
sure to pull the power plug from the AC outlet.
Failure to observe this may cause a fire or
malfunctions.
Do not disassemble
• Do not disassemble or modify this unit. Failure to
observe this may cause a fire, electric shocks,
injury, or malfunctions.
Water warning
• Do not expose the unit to rain, use it near water
or in damp or wet conditions, or place on it any
containers (such as vases, bottles or glasses)
containing liquids which might spill into any
openings or places where water may drop. A
liquid such as water getting into the unit may
cause a fire, electric shocks, or malfunctions.
• Never insert or remove an electric plug with wet
hands. Do not handle this unit with wet hands.
Failure to observe this may cause electric shocks
or malfunctions.
Fire warning
• Do not place any burning items or open flames
near the unit, since they may cause a fire.
Handling caution
• Be careful not to drop or apply strong impact to
this unit or the AC adaptor. Failure to observe this
may cause electric shocks, a fire, or malfunctions.
CAUTION
This content indicates "risk of injury."
Power supply
• Do not cover or wrap the AC adaptor with a cloth
or blanket. Failure to observe this may trap heat,
causing deformation in the case or a fire.
• Do not use an AC outlet where the power plug fits
loosely when inserted. Failure to observe this may
cause a fire, electric shocks, or burns.
• When disconnecting the power plug, always hold
the plug itself and not the cord. Pulling by the
cord can damage it and cause electric shocks or
a fire.
• Insert the power plug firmly all the way into the
AC outlet. Using the unit when it is not plugged in
sufficiently can cause dust to accumulate on the
plug, causing a fire or burns.
Installation
• Do not place the unit in an unstable position
where it might accidentally drop or fall over and
cause injuries.
• Do not install the unit in places where it may
come into contact with corrosive gases or salt air
or places that have excessive smoke or steam.
Doing so may result in malfunction.
• Before moving this unit, be sure to turn off the
power switch and disconnect all connection
cables. Failure to observe this may damage the
cables or cause you or someone else to trip and
fall.
3
En