Werbung
Verfügbare Sprachen
Verfügbare Sprachen
|
When necessary
Troubleshooting
Problem
Skips occur.
Noise occurs.
The sound is distorted.
Feedback occurs.
24
En
Cause
The stylus pressure is not adjusted correctly.
The record is scratched or warped.
The record is dirty.
The record is statically charged.
The stylus is dirty.
The stylus is worn down.
The unit is placed in a location that is subject to vibration.
The unit is too close to the speakers.
The playback volume is too high.
Action
Set the counter weight markings to the stylus pressure
specified for the cartridge.
Do not used scratched or warped records.
Use a commercially available record cleaner to clean the
record.
Use an anti-static brush to remove the static charge.
Remove the dirt from the stylus.
Replace the stylus.
Place the unit in a level location that is not subject to
vibration.
Locate the unit farther away from the speakers.
Adjust the volume of the amplifier.
Reference
page
15
–
–
–
21
22
–
–
–
Werbung
