Werbung
Verfügbare Sprachen
Verfügbare Sprachen
|
When necessary
Moving this unit
Replacing the record stylus
When the tip of the record stylus becomes worn down or damaged, replace it
immediately.
As the replacement stylus, please purchase an ATN3600L replacement stylus
made by Audio-Technica.
CAUTION
Attach the stylus cover before replacing the stylus. The tip of the stylus
might injure you, or it might become damaged.
Take care that children do not swallow the stylus when it is removed.
1
Turn off the power of this unit and of the connected devices, and
disconnect this unit's AC adaptor from the AC outlet.
2
While using your fingers to hold the body of the cartridge, press
the stylus down in the direction of
2
to remove it.
1
22
En
1
, and pull it in the direction of
2
3
While using your fingers to hold the body of the cartridge, insert
the tab of the replacement stylus into the groove on the underside
of the cartridge.
4
Press the stylus upward until you hear a click.
Moving this unit
When moving this unit, lock the tone arm so that it does not move.
Underside
Groove
Werbung
