Cocraft HD 550 Original Bedienungsanleitung Seite 6

Operating Instructions
1. Place the dust extractor on a level and sturdy surface.
2. Check that the hose is properly mounted on the hose adaptor (19) and
to the woodworking tool which is being used.
3. Check that both the filter bag (5) and the dust bag (9) are properly fastened.
4. Start the dust extractor by pushing the green On/Off switch (2),
5. Start the woodworking machine.
6. When you are finished working you should first turn off the machine and then the
dust extractor. Turn off the dust extractor by pushing the red On/Off switch button
or the emergency stop (1).
Emptying the dust bag
Note: Always pull plug from the wall socket before changing dust bag.
1. Hold the bag with one hand.
2. Open the clamp (8) with the other hand.
3. Remove the bag and dispose the waste according to regulations.
4. Attach a new bag and secure it with the clamp (8).
Care and Maintenance
Note: Always unplug the plug from the wall socket before service and cleaning.
Regularly clean the machine from dust. Use a fine brush or a cloth.
Never use solvents or strong detergents.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Rated Voltage
Rated Power
No-Load Speed
Sealing class
Max. under pressure 1500 Pa
Capacity
230 V AC, 50 Hz
550 W
2900 RPM
IP20
760 m³/h
6
Adaptor Ø 100 mm
Bag volume 65 l
Size 1600 × 870 × 460 mm
24 kg
Weight
Sound Pressure LpA 75.5 dB(A)
LwA 95.5 dB(A)
Sound Power