Cocraft HD 550 Original Bedienungsanleitung Seite 5

Assembly
Make sure the dust extractor has not been damaged during transport.
1. Screw together the side panels (15) with the chassis (12) and the plastic casing (17).
The opening for the dust bag should be above the shoe (10). The strengthening
plates (19) should be mounted onto the plastic casing (17) and the side panels (15).
15
2. Place the filter support (4) in the hole (18) on top of the plastic casing.
3. Secure the dust bag (9) with the clamp (8) on the bottom of the plastic casing.
4. Secure the filter bag (5) with the clamp (6) on the top of the plastic casing.
Then hang the filter bag on the filter support (4).
5. Secure the hose (14) to the hose adaptor (19).
6
20
17 15
19
14
5