Stinger HEIGH10 Installationsanleitung Seite 5

Hardware Guide
M4 X 6 M4 X 10
#10 X 3/8 M5 X 10
Note: The 2 Backstrap (SE-1003) can be used in some applications to
add additional support or used in custom installations. The backstrap
may mount to the sides of the radio chassis using the provided screws
in the existing mounting locations or can be mounted directly to the
Plastic Dash Mounting Bracket.
Remove the clamp assembly from the plastic
1
mounting bracket by pushing up from
compression spring side (1) and swing out to
unhook top (2).
M4 X 12 M4 X 14 M4 X 18
NOTE: Depending on the
installation, not all screws
will be used.
2
Compression Spring
1
5