Stinger HEIGH10 Installationsanleitung Seite 14

Using a Single DIN ISO Mountable Dash Kit:
4D
Radio chassis mounts separately into the sub-dash
Display Adjustment & Mounting:
1. Install the dash kit brackets to the main frame.
2. Making sure to use 4 screws, loosely attach the plastic mounting bracket assembly to the side kit
brackets. (FIG. R)
a. (4x) #10 X 3/8 screws.
3. Attach the display to the bracket assembly.
(FIG. S)
14
FIG. R
NOTE: BOOT AND DASH KIT NOT SHOWN
AFTERMARKET
DASH KIT
(NOT INCLUDED)
#10 X 3/8
Coarse Thread Screw
FIG. S
HOOK BOTTOM
FIRST, THEN TOP