Conel CLEAR PRO Bedienungsanleitung Seite 12

12
1.
FIELD OF APPLICATION
The CONEL MULTI-CONTROL-KIT CLEAR PRO is a retrofittable automatic backwash
system. It can be retrofitted for the backwashable filters CLEAR PRO RD / R in sizes DN
20 to DN 50.
2.
DESIGN
The CONEL MULTI-CONTROL-KIT CLEAR PRO is adjustable to a backwash interval bet-
ween 1 - 365 days and preset to 61 days and thus complies with DIN EN 806, Part 5.
Power is supplied by the included USB-C cable. The batteries are necessary and fulfill a
buffer function in the event of a power failure.
When using the CONEL MULTI-CONTROL-KIT CLEAR PRO, the drain funnel of the
filters must be connected to a drain pipe (e.g. with a HT socket DN 50).
3.
INSERT / CHANGE BATTERIES
To insert or replace the batteries, open the
side battery compartment [A] and insert or
replace the batteries [B].
Pay attention to
the correct polarity
of the batteries!
The batteries must remain inserted even when the mains plug is used for power
failure protection and must be replaced every 3 years.
+
+
[B]
[A]