Atlas Copco BCV BL-07L-06 Produktanweisungen Seite 20

Troubleshooting
Troubleshooting
Troubleshooting
Trouble-shooting
If the tool becomes abnormally hot
The tool can handle any normal line jobs that an operator sustains with the
proper adjustments. Should the tool be overheated though, make sure that the
following parameters do not apply:
• torque above rated
• too low speed
• very high prevailing torque
• very soft joints
• short cycle time
20
EN
© Atlas Copco Industrial Technique AB - 9836 749400 00
BCV BL-07L-06