Operating - Atlas Copco BCV BL-07L-06 Produktanweisungen

Operation EN BCV BL-07L-06

Operating

The screwdriver is started by pressing the trigger. Run the screwdriver till the
preset torque is reached and the clutch releases. Then you will hear a click
sound from the clutch and the green LED will lighten and the motor will be
shut off.
Operating switch
The trigger must be released before pushing the reverse button.
Temperature
Temperature in excess of 50°C reduce the performance of the battery. Avoid
extended exposure to heat or sunshine (risk of overheating).
Setting of tightening torque
For accurate operation and safety, the tightening torque of the screwdriver must
be set correctly in relation to the screw joint. Check the torque figure for the ac-
tual joint and the tightening torque given to the joint.
16 © Atlas Copco Industrial Technique AB - 9836 749400 00