VESTEL EVC02-AC22 Serie Benutzerhandbuch Seite 2

SAFETY PRECAUTIONS
Warnings
WARNING: Danger of electrical shock or injury. Turn OFF power at AC mains side or load
center before mounting the AC mains cable to the pole and connecting the electrical supply
of the EV charger.
MOUNTING WARNINGS
1) Read the instructions before mounting your charging station pole and charging station unit.
2) Do not install the charging station near heating devices.
3) Use the specified pole mounting screws and other accessories.
4) This unit is rated for indoor or outdoor installation.
Compatible Charging Units
EVC02-AC22 Series
EVC02-AC11 Series
EVC02-AC7 Series
EVC02-AC3 Series
Required Tools for Installation
•(1x) Drilling Machine
•(1x) Drill bit Ø10mm
•(1x) Hammer (Steel Anchor)
•(1x) Allen Screwdriver(5)
•(1x) Torx T25 (Security) Screw driver
•(1x) 13mm wrench (for Steel Dowel)
•(1x) Wire Cutters
•(1x) Mains Tester Screwdriver
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION :
VESTEL EV CHARGER MUST BE INSTALLED ONLY
BY A LICENSED AND EXPERIENCED ELECTRICIAN IN
ACCORDANCE WITH ALL APPLICABLE LOCAL AND
NATIONAL ELECTRICAL CODES AND STANDARDS.
English - 1 -