Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
OPERATING MANUAL FOR
COLOR CONTROL 470674
Read this short manual carefully and keep it accessible for further
reference!
SAFETY MESSAGES
Disregard of the safety messages may lead to danger of life, burning or
fire!
The product may not be modified or converted.
Do not hang or fasten anything on the product, especially no decoration.
Do not cover the product - provide free air circulation.
In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
A malfunction exists when:
visible damages appear.
the product does not work properly (e.g. flickering).
smoke, steam or crackling sounds appear.
smell of burning is recognisable.
an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
Additional safety messages are indicated by this symbol:
USE AS DIRECTED
This product may:
only be used with a voltage of 100-240V ~50/60Hz.
only be installed according to safety class II (two).
only be operated when firmly mounted on a stable, even and tilt-fixed
surface.
only be operated on normally or not flammable surfaces.
only be used in dry condition,
not in damp or dirt-endangered rooms.
not in areas of high air humidity.
not be exposed to strong mechanical loads or to strong contamination.
INTEGRATION INTO THE COLOR CONTROL SYSTEM
Please read the system manual – www.slv.com/colorcontrolmanual.pdf
INSTALLATION
Use only parts, which are supplied with the product or are described as
accessories!
Inspect the product for loose parts inside the housing. When there are
loose parts inside the housing and these are not explicitly described the
product may not be installed or operated.
The product is solely suited for installation on the wall and ceiling.
Assemble the product as shown in the figure.
OPERATION
Putting into service
Connect the plug of the product with a socket of the public power supply
(mains).
MAINTENANCE AND CARE
Care
Disconnect the product from the power supply and let it cool down, before
you clean the product.
Clean the product on a regular basis using a slightly moistened, soft and fluff-
free cloth. Please also note additional supplied notes on maintenance and
care.
STORAGE AND DISPOSAL
Storage
The product must be stored in a dry and clean environment. Do not strain
the product mechanically during storage.
After a damp or soiling storage the product may only be installed after
checking its condition by an approved electrician.
Disposal (European Union)
Do not dispose the product with the regular household waste! Products
marked with this sign must be disposed according to the directive(WEEE,
2003/108) on electrical and electronic devices at local collection points for
such devices!
.
Hereby, SLV GmbH declares that the radio equipment described here is in
compliance with Directive 1999/05/EC. The full text of the EU declaration of
conformity is available at the following internet address: www.slv.de/jump/470674
This radio equipment may be distributed in all countries of the EU.
art.-no. 470674 © 30.11.2015 SLV GmbH,
Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0
Technical Details are subject to change.
2.4GHz
100-240V
Power
30m
10dBm
~50/60Hz
2W
max.
max.
Werbung
