Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PITCH-BEND buttons
•
Keep the respective PITCH BEND (17 or 18) button depressed during playback to alter the speed by up to
16%.
The PITCH BEND - button (18) reduces the speed.
The PITCH BEND + button (17) increases the speed.
•
The amount that the playback speed is altered depends on the length of time that the respective PITCH
BEND button is kept depressed.
•
When the button is released, the music is played at original speed or at the speed specified by the PITCH sli-
de control (15).
m) BPM Function
The TAP (7) button can be used to determine the beats per minute (Bpm) of a track.
•
Press the TAP button (7) in the rhythm of the music during playback.
•
The display (19) shows the result below the "BPM" display.
n) REVERSE Function
When the REVERSE function is activated, the track is played backwards.
•
Press the button REVERSE (4) to activate or deactivate this function. The button lights up when the REVER-
SE function is activated.
o) TIME
Use the TIME (3) button to switch between the different times displayed (elapsed track time > total remaining time
> remaining track time) on the display.
•
Keep pressing the TIME button (3) until the desired time display appears.
The total remaining time is only displayed for audio CDs. In USB, SD-Card operation or for CDs with
MP3 music files, the total playing time is not indicated.
p) SINGLE/CONTINUE Playback
•
Use the SINGLE/CONTINUE (6) button to select single track playback (SINGLE) of continuous (CONTINUE)
track playback. For single track playback, the device enters pause mode after each track played.
42
Werbung
