BESAFE Go Beyond Bedienungsanleitung Seite 19

Comfort for the baby
Using the lay flat position
1.
To increase your baby's comfort, especially when they're small, the seat
is equipped with a lay flat position, in which the inner part of the seat
moves into a more flat position, while the outer part remains in place.
2.
You can use the lay flat position on a stroller or in the car when the seat
is installed with the ISOfix base.
3.
It is not allowed to use the lay flat position in the car when the seat is
installed with the 3-point vehicle belt. You will notice that the seat is
constructed to block going into lay flat position when installed with the
3-point belt.
4.
To put the seat into lay flat position, pull the lay flat strap or anywhere
at the foot end of the seat's inner part downwards/towards you. You will
notice a small resistance at first, this is normal. (1, 2, 3)
5.
To put the seat into upright position, push the seat's inner part by its foot
end upwards/away from you. You will notice a small resistance at first,
this is normal. (4)
1
3
2
4
BeSafe Go Beyond | 14