Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Disassembly
1.
2.
Screw adjustment
To disassemble the handlebars of your scooter, follow these steps:
Unscrew the two handles of the handle of your scooter.
Remove both handles.
Adjusting of the folding device
Locking pin
1.When the space in the folding device is too large,
the upper screw can be turned to the right with an
Allen key and the left and right screws must be
adjusted.
2.Before adjustment, make sure that the scooter is
in the adjustment lock state and after adjustment,
that the folding switch is elastic and can be used
normally. The locking pin may normally fall down.
Werbung
