Herunterladen Diese Seite drucken

Bosch KIN86HD30 Gebrauchsanleitung Seite 39

Kühl- und gefrierkombination

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Indicating warmest temperature and
switching off warning signal:
Press the alarm button.
The display briefly indicates the
warmest temperature reached in the
freezer compartment. Then the
display indicates the set temperature
again.
From this time on the warmest
temperature is recalculated and
saved.
The button alarm remains lit
Note:
until the set temperature has been
reached again.
o
Home Connect
This appliance is Wi-Fi-capable and can
H o m e C o n n e c t
be remotely controlled using a mobile
device.
Wi-Fi is a registered trade mark
Note:
of the Wi-Fi Alliance.
If the appliance is not connected to the
home network, the appliance functions
like a refrigerator without a network
connection, and can still be manually
operated via the controls.
Notes
Please observe the safety
information in this instruction manual
and ensure that this is still adhered
to, even if you operate the appliance
via the Home Connect app and are
not at home when doing so.
~ "Safety instructions" on page 29
Follow the instructions in the Home
Connect app as well.
Operation on the appliance always
has priority. During this time, it is not
possible to operate the appliance
using the Home Connect app.
Setting up Home Connect
Notes
Observe the Home Connect
supplementary sheet, which is
available for download under
http://www.bosch-home.com with
the instructions. To do so, enter the
E-number of your appliance in the
search field.
After switching on the appliance,
wait at least two minutes until
internal device initialisation is
complete. Only then start setting up
Home Connect.
To implement settings with Home
Connect, the Home Connect app
must be installed on your mobile
device.
Observe the supplied Home
Connect documents for this.
Follow the steps specified by the
app to implement the settings.
The Home Connect menu will close
automatically when the appliance is
not operated for a lengthy period of
time. You can find information on
how to open the Home Connect
menu at the start of the appropriate
sections.
Automatic connection with the home
network (WLAN)
If a WLAN router withWPS function is
available, the refrigerator can
automatically connect to the home
network.
Press the | button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button </> refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows AC and the freezer
compartment temperature display
shows OF.
Home Connect en
39

Werbung

loading