Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING
Do not use means to accelerate the defrosting process or to clean, other than
those recommended by the manufacturer. Be aware that refrigerants may not
contain an odour. Appliance shall be installed, operated and stored in a room
with a floor area larger than 4 m2.
NOTE
The manufacturer may provide other suitable examples or may provide
additional information about the refrigerant odour.
Display diagram
1
2
5
6
Mode selection
1
Ventilation speed
2
Timer button
3
On / Off button
4
Ventilation (without
5
dehumidification)
The first steps as a video tutorial
To make the start with your new dehumidifier a complete success, we have
created a video tutorial that illustrates the first steps and the use in an
understandable way.
If you don't have any experience with dehumidifiers, we recommend that
you watch this tutorial, which you can find on the website below or even
easier by scanning the QR code.
dehydro-s.klamer-home.com
3
7
8
Timer / Humidity -
6
Time / Humidity Display
7
Timer / Humidity +
8
Night mode / Child lock
9
21
The functions of the dehumidifier
The dehumidifier is operated using the buttons to the left and right of the
display. The buttons and display symbols have the following meaning:
Symbol / button
4
9
Note
Your dehumidifier saves the selected operating mode as soon as you have set it. After an
interruption of operation, your unit will start in the last saved mode the next time it is used.
In the event of a disconnection of the power supply by pulling the mains plug or a power
failure, make the settings again if necessary.
Meaning
POWER - On / Off button
For switching the unit on and off. After switching on, the currently
measured humidity is displayed. The unit can be switched off at any time
with this key, even during operation.
DEHUMIDIFY MODE - Automatic dehumidification - Mode selection
Pressing this button selects different operating modes for
dehumidification depending on requirements. The appliance starts in
automatic dehumidification mode when it is first switched on. Pressing
this button repeatedly switches to the Permanent dehumidification,
Heavy drying and Clothes drying modes. The corresponding active mode
is indicated by the corresponding symbol on the display. For more
detailed information, see The meaning of the display symbols.
FAN SPEED - Setting the fan speed
This button allows you to select the desired fan speed. There are two
operating levels for this: Low and high speed level, which are shown
accordingly on the display.The selection of the fan speed is only possible
in the operating modes "Automatic dehumidification" and "Air
purification". In the operating mode "Permanent dehumidification", the
fan automatically runs at a low speed. In the operating modes "Heavy
drying" and "Clothes drying" the fan automatically runs at high speed. It
is not possible to change the fan speed manually in these operating
modes.
TIMER - Timer function
The duration of the dehumidification/air purification can be
programmed via the timer function. For more information, see Using the
timer.
22
Werbung
