Restore Factory Settings - HomeMatic HM-ES-PMSw1-Pl Bedienungsanleitung

command to the Wireless MP3 Chime and the measured values of the dry-
er to the Central Control Unit. The chime will play the desired signal and
you will know that your dryer has finished running.
Corridor
Cellar
7

Restore factory settings

The factory settings of the switch actuator with power metering can be
restored manually. If you do this, you will lose all your settings.
Before restoring the factory settings, please delete the device
from the user interface WebUI first.
To do this, proceed as follows:
• Press and hold down the channel button (A) for at least four
seconds until the device LED (B) will slowly start flashing
orange.
Audio signal
Kitchen
Measured
value
Restore factory settings
< 100 W
35