Herunterladen Diese Seite drucken

Panasonic CQ-RD445LEN Serviceanleitung Seite 4

Rds-autoracio mit cd-wechsler-steuerung und abnehmbarem bedieteil

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

If the car is not already running, turn the key in the ignition until the ac-
cessory indicator lights.
Press PWR button to switch on the power.
f-M { Aish
(Ju
Volume
Press "VOLA" or "VOL
V" to increase or decrease volume.
Volume Level
0 to 40
Press "VOLA\" or "VOL \V" for more than a half second to sequentially
change numeric levels on the display.
HDB (High Definition Bass)
Especially for rock music, the bass-sound will be more powerful.
e Press HDB to be able to listen to high-definition bass.
e Press HDB again to retum to the normal tone.
|
Attenuator
@ Press ATT. Volume will decrease to about 1/10 of its previous fevel.
e Press ATT again to deactivate when listening at norma! volume.
ATT
Note: This unit is equipped with anti-volume-blast circuit which serves as an automatic volume level ad-
juster so that you will not be deafened with sudden loud volume.
This system operates as below. When PWR is first pressed to switch on, the volume level is low. After
that, the volume level gradually returns to the level when the switch is turned off.
Anti-volume-blast circuit is not effective when volume level is lower than position 14 at the display.
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
Normal Mode ™* VOL > BAS » TRE ™® BAL =» FAD
Bi
a
eh
Bass and Treble
e@Press SEL to select the BASS (TREBLE) mode. Press "VOL A" or
'VOL' " to increase or decrease the bass/treble response.
-12 to +12
—12 to +12
e@ Press "VOL A" or "VOL \/" for more than a half second to sequential-
§
ly change numeric levels on the display.
Balance
'e Press SEL to select the BALANCE mode. Press "VOL" or "VOL\V'"
to shift the sound volume to the right or left speakers.
I
1to 15
Balance Center
1 to 15
@ Press "VOLA" or "VOL VV" for more than a half second to sequential-
ly change numeric levels on the display.
Fader
e@Press SEL to select the FADER mode. Press "VOL" or "VOLV" to
shift the sound volume to the front or rear speakers.
e Press "VOL A" or "VOL V'" for more than a half second to sequential-
ly change numeric levels cn the display.
110 15
Fader Center
1 to 15
Note: When a Audio contro! mode (BAS/TRE/BAL/FAD) is selected but no operation is made within 5 sec-
onds (2 seconds at VOL mode), the display will return to the normal operation (Radio, Tape, CD Changer
or AUX mode). In such a case, press SEL again to select the control mode.
N31S€
N31S

Werbung

loading

Diese Anleitung auch für:

Cq-rd435len