Werbung
Verfügbare Sprachen
Verfügbare Sprachen
-#L-
@ Mounting Collar
installation Procedures
1. Secure the Mounting Collar @.
Insert Mounting Collar @ into the car's dashboard, and bend mounting tabs out with a screwdriver..
Dashboard
Mounting Tab
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ®, using a suitable wrench.
Unit
S
c) Insert the unit into Mounting Collar © and push it in until "click" Is heard.
"———~ © Mounting Bolt
Unit
d) Secure the rear of the unit to the car by either of the two recommended methods on the next page.
ll Using the Rear Support Strap ©
ss
Affix one end of the Rear Support Strap ©) to the rear of the unit, and the other end to the Fire Wall of Car,
or some other metallic area.
:
@) Plain Washer _
Fire Wall of Car
es
S
Hex. Bolt
fi
2
&y)
©
os
Ze
*
~ 2
"\@ Toothed Lock Washer
@ Spring Washer
@ Hex. Nut
@ Hex. Nut
yi a
@) Spring Washer
| -\@ Plain Washer
() Rear Support Stra
i Using the Rubber Cushion (Optional)
(if there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt © on the rear of the unit with Rubber Cushion (Optional), and mount it into the exist-
ing Rear Support Bracket.
Rear Support Bracket
(existing on the car)
.. @ Mounting Collar
N31SEP
| NaIS
Werbung
