Cisco Systems Linksys WRT54G Bedienungsanleitung Seite 31

Wireless-G Broadband Router
2. Press the Router's orange Cisco logo on its front panel. When the logo turns white and begins to flash, press
the SecureEasySetup button on another device. The Router's Cisco logo will stop flashing when the device
has been added to the network. Then repeat this procedure for each additional SecureEasySetup device.
When you have finished configuring the devices in your wireless network, click the Next button to continue.
NOTE: You can only add one SecureEasySetup device at a time.
3. The Setup Wizard will ask you to review your settings before it saves them. Write down these settings if you
need to manually configure any non-SecureEasySetup devices.
Click the Yes button if you are satisfied with your settings, or click the No button if you do not want to save
your new settings.
Chapter 5: Setting up the Wireless-G Broadband Router
Using the Setup Wizard
All manuals and user guides at all-guides.com
Figure 5-23: Setup Wizard's Configure Wireless
Settings Screen
Figure 5-24: Setup Wizard's Confirm New Settings Screen
23