Safety Instructions; Product Description - Tecsis C1351X085005 Betriebsanleitung

Prüfpume/Test pump
C1351X085005
1

Safety instructions

Read these operating instructions carefully prior to the use of
pneumatic hand test pump C1351X085005. The pressure
inside the pump can be extremely high. Ensure that all
pressure connections have been established correctly.

2 Product description

Test pumps are used to generate pressures for checking, adjusting and
calibrating mechanical and electronic pressure measuring instruments by
comparative measurements. These pressure tests may be carried out in
laboratories, workshops or on site at the measuring point.
If the instrument to be tested and a sufficiently accurate reference -
measuring instrument are connected up to the test pump, the same
pressure is applied to the two measuring instruments when the pump is
operated. By comparing the two measured values at random pressure
values, the accuracy can be verified or the instrument under test can be
adjusted.
Despite
C1351X085005 is easy to operate and allows for exact generation of the
required test pressures; a change -over switch enables the generation of
vacuum as well. The pump is fitted with a fine adjustment valve for the
precise adjustment of pressures. The reference instrument is screwed
directly on to the top of the pump and the unit under test is connected by
means of the connection tube incorporating an adapter 1/4" BSP female
thread, contained in the scope of delivery.
www.tecsis.de
its compact dimensions,
BD_BE 527 a
the ha nd test pump model
13