Safety Instructions; Product Description - Tecsis 1351.085.005 Betriebsanleitung

Betriebsanleitung - Operating manual
1

Safety instructions

Read these operating instructions carefully prior to the use of
pneumatic hand test pump 1351.085.005. The pressure inside
the pump can be extremely high. Ensure that all pressure
connections have been established correctly.

2 Product description

Test pumps are used to generate pressures for checking, adjusting and
calibrating mechanical and electronic pressure measuring instruments by
comparative measurements. These pressure tests may be carried out in
laboratories, workshops or on site at the measuring point.
If the instrument to be tested and a sufficiently accurate reference -
measuring instrument are connected up to the test pump, the same
pressure is applied to the two measuring instruments when the pump is
operated. By comparing the two measured values at random pressure
values, the accuracy can be verified or the instrument under test can be
adjusted.
Despite its compact dimensions, the hand test pump model 1351.085.005
is easy to operate and allows for exact generation o f the required test
pressures; a change-over switch enables the generation of vacuum as
well. The pump is fitted with a fine adjustment valve for the precise
adjustment of pressures. The reference instrument is screwed directly on
to the top of the pump and the unit under test is connected by means of
the connection tube incorporating an adapter 1/4" BSP female thread,
contained in the scope of delivery.
13