Mounting Instructions - Tecsis C1351X085005 Betriebsanleitung

Prüfpume/Test pump
C1351X085005

3 Mounting instructions

The reference instrument is fitted to the upper side of the hand test pump.
Fingertight fastening of the reference instrument with the knurled nut is
sufficient. The reference instrument is sealed by the integral o-ring sealing
gasket.
The unit under test is mounted to the end of the flexible tube. Please use
a suitable sealing gasket from the adapter set purchased separately as an
accessory. Tighten the connector to prevent any leaks to a maximum
torque of 15 Nm. In order to adapt the different connection threads of the
unit under test, the test tube can be fitted with different adapters from the
optional set of adapters.
Do not use teflon tape, this may damage your test pump.
.
You can unscrew the tube and also directly attach th e test specimen with
the same adapter to the pump (to minimize volume of your test system,
for more easy operating the test pump ).
14 BD_BE 527 a www.tecsis.de