Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
Basic Usage
The Spa & Pool Cleaner Automatic is not intended for use for inground swimming pools, it is only
designed for cleaning above-ground swimmingpools, hot tubs and spa's. Improper use may result
in damages to the cleaner and are not under warranty.
WARNING!
1. The cleaner is designed for underwater application only, please submerged during
use. Otherwise it may damage the cleaner.
2. Suitable for pools and spa's till water depth 120 cm, minimum water depth is 35 cm.
3. The switch handle must not be submerged in water. Water entering the chamber will
ruin the cleaner.
4. Please ensure that the filter bag is properly installed before use.
5. Operating water temperature: 4 ° C (39.2 ° F) -35 ° C (95 ° F).
1. Screw the suction head into the bottom of the telescopic pole.[fig.A]
2. Unscrew the battery cap and take out the battery holder [fig.B], insert 8 Alkaline batteries
(not included) into the battery holder [fig.C]. The positive and negative terminals of the battery
should be installed correctly, otherwise, the product will not function [fig.D].
3. Press button "I" [fig.E], the unit will start working.
MV-1925-05-2023 . © Alle rettigheder forbeholdes Swim & Fun A/S
UK
29
Werbung
