Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instruction
Quick start instructions,
DoD 2.0
EN
diagnostics on demand service
Integration of the VCI
into a Wifi network.
1.
Connect the VCI to the OBD socket on
the vehicle. After a few seconds, the or-
ange LED on the Ethernet port lights up.
The green LED flashes slowly (approx.
every second). The Wifi module of the
VCI is now online and ready for connec-
tion to the network.
2.
Open the Wifi settings on your com-
puter or smartphone. Search for the VCI
("Connector" + serial number), select it
and click Connect.
3.
Open
a
connector.help in the address bar. A
password entry window opens. Enter
the password for your Wifi network.
• The green LED now flashes quickly
(every 300 ms). The connection to the
Wifi network is established.
• The flashing frequency of the green
LED becomes faster (every 100 ms).
Means that the connection was suc-
cessful and the connection to the
DoD server is now established.
• Both LEDs are permanently lit. The
VCI is connected to the server and
you can use the DoD service.
www.herthundbuss.com
web
browser
and
enter
IMPORTANT
Router TCP / UDP settings
With some routers, certain ports may
have to be opened additionally in the
router security settings.
Make sure that the following ports are
not blocked.
Port: 443
Port: 10001
Port: 46329
95990400 | 95990401
10
Werbung
