Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12
www.aeg.com
• The indicators
and
• The indicator
• The display shows the current
setting.
–
–
2. Press
3. Press on/off to confirm the setting.
6.6 How to set the colour of
the TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
Make sure the appliance is in user mode.
1. Press
• The indicators
and
• The indicator
• The display shows a number and
letter C. Each number refers to a
different colour.
–
2. Press
colour.
3. Press on/off to confirm the setting.
6.7 AirDry
AirDry improves the drying results with
less energy consumption.
,
,
are off.
still flashes.
= the acoustic signal is
deactivated.
= the acoustic signal is
activated.
to change the setting.
.
,
,
are off.
still flashes.
= TimeBeam
deactivated.
repeatedly to change the
,
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
,
programme ends.
AirDry is automatically activated with all
programmes excluding
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
• The indicators
and
• The indicator
flashes.
• The display shows the current
setting
–
–
(if
.
,
,
,
are off.
still
= AirDry is deactivated.
= AirDry is activated.
Werbung
