Cramer 2600186 Bedienungsanleitung Seite 6

EN
No. Name Function
1 Self-pro- This machine allows self propelled
pelled drive mode that it can walk itself. Self
drive propelled drive mode brings you easy
paddle operation.
22 Zero turn Turn assist handles for quick and
trigger effortless steering. This machine is
23
equipped with zero turn system,
which gives the machine accurate
and smooth steering without devia-
tion.
2 Chute de- The chute deflector can be adjusted
flector up and down to adjust the throwing
control distance of snow.
handle
3 Auger/ The auger/impeller can be started to
impeller rotate when machine is moving. Roa-
control tating auger/impeller breaks snow
trigger easily and clears snow quickly.
4 LED Push button (A, B, C, D) to adjust the
headlight rear/front headlights.
button
E Battery Power display for each battery (3
indicator pcs).
5 Self-pro- Allows operators to select a comforta-
pelled ble driving speed. It gives 3 forward
drive speeds and 1 backward self-propel-
speed led and 1 neutral.
control
switch
6 ON but- The ON button is used to turn the
ton machine on.
7 Auger/ Adjust the switch to control the aug-
impeller er/impeller run fast or slowly.
speed
control
switch
9 Chute Control the 200° adjustable discharge
control chute to turn to multiple different di-
rod rections.
4.3 START AND STOP THE AUGER/
IMPELLER
Figure 2
To start auger/impeller:
• Push the ON button.
• Depress and hold the auger paddle.
Finish these 2 actions within 5 seconds.
To stop auger/impeller:
English
NOTE
• Release the auger paddle.
Lower the scraper to the ground to remove the snow.
WARNING
Keep bystanders a safe distance from the machine.
WARNING
Examine the work area. Remove all stones, sticks,
wire, bones, and other debris that can ricochet
because of the rotating impeller.
4.4 ADJUST THE AUGER SPEED
Figure 2
(If the unit is in the OFF position):
1. Push the ON button.
2. Depress and hold the auger paddle.
3. To increase the auger speed, push the auger speed
lever forward.
4. To decrease the auger speed, pull the auger speed
lever backwards.
Lower the scraper to the ground to remove the snow.
WARNING
Keep bystanders a safe distance from the machine.
WARNING
Examine the work area. Remove all stones, sticks,
wire, bones, and other debris that can ricochet
because of the rotating impeller.
4.5 SELF-PROPELLED DRIVE MODE
Figure 2
To start drive system:
1. Push the ON button.
2. Depress and hold the drive paddle.
3. To increase the drive speed, push the drive speed
control lever forwards.
4. To decrease the drive speed, pull the drive speed
control lever backwards.
To stop the drive system:
1. Release the drive paddle.
If machine is left idle, in either operation for longer
than 5 seconds, you will need to start the process over
again.
6
NOTE
NOTE
NOTE